rc helicopter videos
Watching: Watching: Home made sub micro rc helicopter
Video scenes shots:
Watch the video:
Other videos by this author:
 |
My home made CNC router milling some aluminium Posted by: tahustvedt
Video duration: 127 seconds Here my home made CNC router is milling a scale RC helicopter tail rotor hub from a piece of 6082-T6 aluminium. You can see me spraying spirit on the work piece occasionally for cooling. This works great for aluminium. Related: aluminium, cnc, helicopter, mill, rc, router |
|
|
Home made sub-micro RC helicopter Posted by: tahustvedt
Video duration: 171 seconds This is my second home made helicopter design. The first one used a home made motor but people had problems making their own motos so I designed this one which uses a standard GWS IPS motor. The canopy on this one is actually a MIA canopy. :) Free plans can be downloaded from http://www.enrarot.n et/rc/plans/ips-subm icroheli-v10.zip Related: helicopter, indoor, ips, norway, sub-micro |
 |
Agusta 109 scale RC model test flight Posted by: tahustvedt
Video duration: 258 seconds Another test flight. This time I'm testing different expo settings. The fuselage shell is a Wings of Wind fuselage. the mechanics and rotors are home made. 145 cm rotor diametre 1100 rpm Related: 109, agusta, flybarless, rc, scale |
 |
More of my Starmax F-5 EDF Posted by: tahustvedt
Video duration: 211 seconds It's stock except for some home made CNC milled parts in the landing gear, an extra elevator servo and some CF strengthening. Related: edf, f-5, norway, starmax |
 |
Agusta 109 scale RC model test flight Posted by: tahustvedt
Video duration: 87 seconds Testing my Agusta A-109BA scale RC model. This is just a short clip from the session. Homemade mechanics and rotor systems. Main rotor diametre: 1440 mm Weight: 3300 g Main rotor rpm: 900 Related: 109, agusta, blade, four, helicopter, multi, norway, rc, scale |
 |
Starmax F-5 EDF Posted by: tahustvedt
Video duration: 149 seconds My Starmax F-5. It's stock except for some home made CNC milled parts in the landing gear and som CF strengthening. Related: edf, f-5, norway, starmax |
 |
Ikarus Eco 8 Royal aerobatics Posted by: tahustvedt
Video duration: 271 seconds My old Eco 8 Royal flying some hard aerobatics. Stock rotor system with thrust bearings and MAH 463 carbon blades. Tail boom struts removed because they caused resonance problems. Hyperion Z3025-12 motor CC Ph 45 HV ESC FP 25C 8S 2170 mAh lipo 3x Multiplex Digi Polo 4 servos 1x Futaba 9650 servo Futaba GY401 gyro 1950 rpm Related: aerobatic, eco, ikarus, norway, royal |
 |
CNC milling a little propeller blade from aluminium. Posted by: tahustvedt
Video duration: 14 seconds Just for fun. I was bored. Here's a short clip from the finishing pass on an aluminium blade. Related: blade, cnc, diy, propeller, rc |
 |
Tamjet 1/8 F-16 and Stumax EDF maiden flight Posted by: tahustvedt
Video duration: 47 seconds Here are a few shots from the maiden flight with my 1/8 scale F-16. Stumax SM110-52 EDF 12S Zippy-H 5000 mAh lipo Kontronik Power Jazz ESC 3600 W Related: f-16, norway, stumax, tamjet, tamjets |
 |
Four-bladed rotor test helicopter flight Posted by: tahustvedt
Video duration: 206 seconds This is a flight with my four bladed test helicopter. The headspeed is just 850 rpm and it flies fine, but is a little more challenging than a regular flybarred heli. Related: diy, helicopter, multi-blade, norway, rc |
 |
Tamjet 1/8 F-16 and Stumax EDF Posted by: tahustvedt
Video duration: 103 seconds Tamjet 1/8 F-16 Stumax EDF 12S Zippy-H 5000 mAh Kontronik Power Jazz Related: f-16, stumax, tamjet |
 |
Four-bladed rotor test helicopter flight Posted by: tahustvedt
Video duration: 82 seconds Some fast forward flying with my four blade test helicopter. At the end before I land it falls through the air because I stopped too abruptly. Related: blade, four, helicopter, multi, norway, rc, rotor, scale |
 |
On board video from my Eco 8 Royal Posted by: tahustvedt
Video duration: 146 seconds I shot this video over the river behind my house. The heli is an Ikarus Eco 8 Royal that I used for aerobatic flying so the camera mount isn't ideal which is why there are some vibrations in the video. Related: aerial, ap, coolpix, eco, helicopter, ikarus, nikon, norway, rc, royal |
 |
3D CNC milling RC scale airplane propeller blades Posted by: tahustvedt
Video duration: 43 seconds This video shows the machine milling out two propeller blades for my 1:6 scale P-40 scale model. Related: 3d, cnc, milling, model, rc, scale, wood |
 |
Agusta 109 scale RC model test flight Posted by: tahustvedt
Video duration: 312 seconds Testing the rotor system after a modification. Home made structure, mechanics and rotors. Fuselage from Wings Of Wind Models Hacker outrunner 8S 3300 mAh Li-po battery Castle Creations HV45 ESC Related: 109, agusta, diy, helicopter, rc |
 |
CNC-milling a little shaft coupling Posted by: tahustvedt
Video duration: 28 seconds My home made CNC-router milling a little shaft coupling out of some 6161-T6 with a 4 mm 4-flute carbide end mill. Related: cnc, diy |
 |
Electric Hangar 9 Sopwith Camel Posted by: tahustvedt
Video duration: 117 seconds My electric Hangar 9 sopwith Camel. Modified AXI 4130 motor, 18x6 wide APC propeller and 8S 4170 mAh battery Related: electric, norway, rc |
 |
Flying Styro F-16 EDF Posted by: tahustvedt
Video duration: 107 seconds My little Flying Styro F-16 EDF zooming around. Related: edf, f-16, flying, norway, rc, styro |
 |
First startup - Scale RC Agusta 109 Posted by: tahustvedt
Video duration: 23 seconds Starting up without main rotor blades for the first time to check the tail rotor for vibrations. All the mechanics and rotor systems are home made using CAD and my CNC mill. The rotor head looks wonky while static because the blades aren't attached. Related: 109, agusta, cnc, diy, electric, helicopter, norway, rc, scale |
 |
CNC milling sheet aluminium Posted by: tahustvedt
Video duration: 36 seconds Making tail fins for a RC helicopter Related: cnc, diy, helicopter, kress, rc |
 |
cnc14.wmv Posted by: tahustvedt
Video duration: 86 seconds Utskjæring av skilt. Related: cnc14 |
